Differences

This shows you the differences between two versions of the page.

--- gamemanual:howto_newgeneration [2021/11/19 14:17] – [Making a New Generation Traditional Method] admin
+++ gamemanual:howto_newgeneration [2021/11/19 14:25] – [Making a New Generation Traditional Method] admin
@@ Line 35: / Line 35: @@
 In this panel, you'll find three blue buttons (#3). These buttons are for component selection. Clicking any of these buttons will pull up the component selection window. If you decide to change a component, you'll have to pay additional development costs (#4). The base development cost for a new generation is 15% of a new design's development cost. If you change a component, you'll lose some of the discounts. For a gearbox change, it is only 5%. An engine change is 5%, but it also requires the gearbox development costs for a total of 10%. If you decide to change a chassis, the design will cost the same as designing a new vehicle.  You can find the total percentage of development costs in the upper right (#5).
-The checkbox on the center-right of the window, FIXME
+The checkbox on the center-right of the window (#6) will end production, scrap inventories, and replace the old generation vehicle with the new generation vehicle when the new generation is completed. We highly recommend checking this box to save you time and frustration.
 Finally, you have two options. If you plan on not making any changes to your sliders or body design, you can click “Quick Trim” (#7). The game will skip the designer phase and quickly make your new generation, thus completing the design.
@@ Line 48: / Line 48: @@
 {{ :gamemanual:newgeneration_modifyvehicle.png?direct&400|}}
+If you choose to continue with the advanced designer, it will work exactly like the advanced designer when designing new vehicles. Unfortunately, there is no way to switch to the Assisted designer.
+When making design changes, please note, you will only get the trim discount while the sliders are within a reasonable limit of the base model. If you make the new trim significantly better, you will lose the new trim discounts. Please keep an eye on the design costs while you are adjusting sliders.
 ~~CL~~