GearCity Wiki

User Tools

Site Tools

Trace:
japanesemanual:ja_gm_engines_design

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revisionPrevious revision
Next revision		Previous revision
japanesemanual:ja_gm_engines_design [2023/01/08 03:18] – nichirinmotorjapanesemanual:ja_gm_engines_design [2024/11/08 08:32] (current) – [サブコンポーネント] nichirinmotor
Line 1: Line 1:
 +====== エンジンゲームメカニクス ======
  
 +マニュアルのゲームメカニクスセクションでは、ゲームの計算で使用される内部式の詳細を説明します。このセクションでは擬似的なコードを使用しており、ゲーム内のコードと100％同じとは限りません。
 +
 +マニュアルのゲームメカニクスパートは、主に 「なぜX、Y、Zをするとこの評価になるのか？」というよくある質問に対するリファレンスとして設計されています。通常、この答えには多くの異なる変数が含まれており、マニュアルのこのセクションではそれを実証しています。
 +
 +**マニュアルのゲームメカニクスセクションは、[[https://idioms.thefreedictionary.com/seeing+how+the+sausage+gets+made|ソーセージがどのように作られるか]]を示しています。ですから、ゲームを楽しむのであれば、このマニュアルの部分は避けた方がいいかもしれません。** 
 +
 +
 +
 +===== 変数 =====
 +
 +計算式で使用する変数とその説明の表です。
 +
 +==== スライダー ====
 +
 +^ 変数 ^ 説明 ^  ^ 変数 ^ 説明 ^
 +| **Slider_Layout_Bore ** | スライダー：エンジンデザインレイアウト ⇒ ボア |  | **Slider_Layout_Stroke ** | スライダー：エンジンデザインレイアウト ⇒ ストローク |  
 +| **Slider_Layout_Length** | スライダー：エンジンデザインレイアウト ⇒ 長さ |  | **Slider_Layout_Width** | スライダー：エンジンデザインレイアウト ⇒ 幅 |
 +| **Slider_Layout_Displacement** | (スライダーレイアウトボア＋スライダーレイアウトストローク) ÷ 2.0 |  | **Slider_Layout_Weight** | スライダー：エンジンデザインレイアウト ⇒ 重量 |
 +| **Slider_Performance_Revolutions** | スライダー：エンジンデザインパフォーマンス ⇒ 回転数 |  | **Slider_Performance_Torque** | スライダー：エンジンデザインパフォーマンス ⇒ エンジントルク |
 +| **Slider_Performance_FuelEconomy** | スライダー：エンジンデザインパフォーマンス ⇒ 燃費 |  | **Slider_DesignFocus_Performance** | スライダー：エンジンデザインフォーカス ⇒ パフォーマンス重視 |
 +| **Slider_DesignFocus_FuelEconomy** | スライダー：エンジンデザインフォーカス ⇒ 燃費重視  |  | **Slider_DesignFocus_Dependability** | スライダー：エンジンデザインフォーカス ⇒ ディペンダビリティ重視  |
 +| **Slider_DesignFocus_DesignPace ** | スライダー：エンジンデザインフォーカス ⇒ 開発ペース  |  | **Slider_Technology_Materials** | スライダー：エンジンデザイン技術 ⇒ 材料品質  |
 +| **Slider_Technology_Components** | スライダー：エンジンデザイン技術 ⇒ 部品品質 |  | **Slider_Technology_Technologies** | スライダー：エンジンデザイン技術 ⇒ 技術 |   
 +| **Slider_Technology_Techniques** | スライダー：エンジンデザイン技術 ⇒ 製造技術 |
 +
 +==== サブコンポーネント ====
 +
 +^ 変数 ^ 説明 ^  ^ 変数 ^ 説明 ^
 +| **SubComponent_Layout_UnitCosts** | エンジンレイアウトユニットコスト |  | **SubComponent_Layout_DesignCosts** | エンジンレイアウト設計コスト |   
 +| **SubComponent_Layout_DesignRequirements** | エンジンレイアウト設計要件 |  | **SubComponent_Layout_ManufacturingRequirements** | エンジンレイアウト製造要件 |   
 +| **SubComponent_Layout_Reliability** | エンジンレイアウト信頼性値 |  | **SubComponent_Layout_Weight** | エンジンレイアウト重量値 |   
 +| **SubComponent_Layout_FinishTime** | エンジンレイアウト開発期間値 |  | **SubComponent_Layout_Width** | エンジンレイアウト幅値 |   
 +| **SubComponent_Layout_Length** | エンジンレイアウト長さ値 |  | **SubComponent_Layout_Smoothness** | エンジンレイアウト滑らかさ値 |   
 +| **SubComponent_Layout_ValveLimit** | エンジンレイアウトバルブレイアウトにつかえるもの |  | **SubComponent_Layout_UseDisplacement** | エンジンレイアウト排気量 |   
 +| **SubComponent_Layout_CylinderLengthArrangment** | エンジンレイアウトシリンダーバンク数 |  | **SubComponent_Layout_FuelRatings** | エンジンレイアウト燃費値 |   
 +| **SubComponent_Layout_PowerRatings** | エンジンレイアウトパワー評価値 |  | **SubComponent_Layout_Turbined** | エンジンレイアウトの円形 |   
 +| **SubComponent_Cylinders_UnitCosts** | シリンダーユニットコスト値 |  | **SubComponent_Cylinders_DesignCosts** | シリンダー設計コスト値 |   
 +| **SubComponent_Cylinders_DesignRequire** | シリンダー設計要件 |  | **SubComponent_Cylinders_ManufacturingRequire** | シリンダー製造要件 |   
 +| **SubComponent_Cylinders_PowerRating** | シリンダーパワー値 |  | **SubComponent_Cylinders_FuelRating** | シリンダー燃費値 |   
 +| **SubComponent_Cylinders_ReliabilityRating** | シリンダー信頼性値 |  | **SubComponent_Cylinders_Weight** | シリンダー重量値 |   
 +| **SubComponent_Cylinders_FinishTime** | シリンダー開発期間値 |  | **SubComponent_Cylinders_CylinderCount** | シリンダー数 |   
 +| **SubComponent_Cylinders_SmoothnessRating** | シリンダー滑らかさ値 |  | **SubComponent_FuelType_UnitCosts** | 燃料タイプユニットコスト |   
 +| **SubComponent_FuelType_DesignCosts** | 燃料タイプ設計コスト |  | **SubComponent_FuelType_DesignRequirements** | 燃料タイプレイアウト設計要件 |   
 +| **SubComponent_FuelType_ManufacturingRequirements** | 燃料タイプレイアウト製造要件 |  | **SubComponent_FuelType_PowerRating** | 燃料タイプパワー値 |   
 +| **SubComponent_FuelType_FuelRating** | 燃料タイプ燃費値 |  | **SubComponent_FuelType_ReliabilityRating** | 燃料タイプ信頼性値 |   
 +| **SubComponent_FuelType_Weight** | 燃料タイプ重量値 |  | **SubComponent_FuelType_FinishTime** | 燃料タイプ開発期間値 |   
 +| **SubComponent_FuelType_RPM** | 燃料タイプRPM値 |  | **SubComponent_FuelType_SmoothnessRating** | 燃料タイプ滑らかさ値 |   
 +| **SubComponent_FuelType_PopularityRating** | 燃料タイプ人気値 |  | **SubComponent_Induction_UnitCosts** | 過給機ユニットコスト |   
 +| **SubComponent_Induction_DesignCosts** | 過給機設計コスト |  | **SubComponent_Induction_DesignRequirements** | 過給機設計要件 |   
 +| **SubComponent_Induction_ManufacturingRequirements** | 過給機製造要件 |  | **SubComponent_Induction_PowerRating** | 過給機パワー値 |   
 +| **SubComponent_Induction_FuelRating** | 過給機燃費値 |  | **SubComponent_Induction_ReliabilityRating** | 過給機信頼性値 |   
 +| **SubComponent_Induction_Weight** | 過給機重量値 |  | **SubComponent_Induction_FinishTime** | 過給機開発期間値 |   
 +| **SubComponent_Valve_UnitCosts** | バルブシステムユニットコスト |  | **SubComponent_Valve_DesignCosts** | バルブシステム設計コスト |   
 +| **SubComponent_Valve_DesignRequirements** | バルブシステム設計要件 |  | **SubComponent_Valve_ManufacturingRequirements** | バルブシステム製造要件 |   
 +| **SubComponent_Valve_FuelRating** | バルブシステム燃費値 |  | **SubComponent_Valve_ReliabilityRating** | バルブシステム燃料信頼性値 |   
 +| **SubComponent_Valve_Weight** | バルブシステム燃料重量値 |  | **SubComponent_Valve_FinishTime** | バルブシステム開発期間値 |   
 +| **SubComponent_Valve_RPM** | バルブシステムRPM値 |  | **SubComponent_Valve_SmoothnessRating** | バルブシステム滑らかさ値 |   
 +| **SubComponent_Valve_Size** | バルブシステムサイズ値 |  | **SubComponent_Valve_PowerRating** | バルブシステムパワー値 |   
 +
 +
 +==== グローバル ====
 +
 +
 +^ 変数 ^ 説明 ^  ^ 変数 ^ 説明 ^
 +| ** Year ** | 現在のゲーム年 | | **Marq_DesignEngineSkill** | 選択したブランドのエンジンデザインスキル |
 +| ** AdjustedYear ** | 年 - 1899年（2020年以降は121に設定されています） | | ** PreResearchEngineAmountEffect ** | エンジンデザインに関する研究チームのボーナス | 
 +| ** Global_Interest_Rate ** | TurnEvents.xmlファイルで定義されているグローバル金利  | | ** carPriceRate ** | TurnEvents.xmlファイルで定義されているグローバル車両コスト変数 |
 +| ** ex_0d996p_year50R ** | 0.996%%^%%(2050-year) if Year > 2020: 0.901037361  | | ** ex_1d0023p_year99 ** | 1.0023%%^%%(year-1899) |
 +| ** ex_1d0024p_year99 ** | 1.0024%%^%%(year-1899) | | ** ex_1d003p_year99 ** | 1.003%%^%%(year-1899) |
 +| ** ex_1d0035p_year99 ** | 1.0035%%^%%(year-1899) | | ** ex_1d004p_year99 ** | 1.004%%^%%(year-1899) |
 +| ** ex_1d005p_year99 ** | 1.005%%^%%(year-1899) | | ** ex_1d0051p_year99 ** | 1.0051%%^%%(year-1899) |
 +| ** ex_1d006p_year99 ** | 1.006%%^%%(year-1899) | | ** ex_1d007p_year99 ** | 1.007%%^%%(year-1899) |
 +| ** ex_1d008p_year99 ** | 1.008%%^%%(year-1899) | | ** ex_1d01p_year99 ** | 1.01%%^%%(year-1899) |
 +| ** ex_1d025p_year99 ** | 1.025%%^%%(year-1899) | | ** ex_1d03p_year99 ** | 1.03%%^%%(year-1899) |
 +| ** ex_1d033p_year99 ** | 1.033%%^%%(year-1899) | | ** ex_1d035p_year99 ** | 1.035%%^%%(year-1899) |
 +| ** ex_1d038p_year99 ** | 1.038%%^%%(year-1899) | | ** ex_1d039p_year99 ** | 1.039%%^%%(year-1899) |
 +| ** ex_1d04p_year99 ** | 1.04%%^%%(year-1899) | | ** ex_1d05p_year99 ** | 1.05%%^%%(year-1899) |
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +
 +===== 仕様 =====
 +
 +==== ボア ====
 +
 +数値はミリメートル単位です。
 +
 +Bore_mm = スライダーの横にあるテキストボックスの値。
 +
 +==== ストローク ====
 +
 +数値はミリメートル単位です。
 +
 +Stroke_mm = スライダーの横にあるテキストボックスの値
 +
 +
 +==== 排気量 ====
 +
 +数値は立方センチメートル(cc)です
 +
 +<code cpp>
 +Displacement_CC = (0.7854 * ((Bore_mm/10) * (Bore_mm/10)) * (Stroke_mm/10) * SubComponent_Cylinders_CylinderCount)
 +</code>
 +
 +==== トルク ====
 +
 +数値はlb-ft単位です。
 +
 +
 +<code cpp>
 +
 +Torque = 10 + (Marq_DesignEngineSkill/20.0) + 
 +    ((((25) * ((Slider_Performance_Torque - 0.4)*1.5)*ex_1d01p_year99) +
 +    ((4*(SubComponent_Layout_Length + SubComponent_Layout_Width) )*ex_1d005p_year99) - 
 +    (14 * (Slider_Performance_FuelEconomy+Slider_DesignFocus_FuelEconomy) * ex_1d004p_year99) +
 +    (SubComponent_Layout_PowerRatings*5 + SubComponent_Cylinders_PowerRating*13 +
 +    SubComponent_FuelType_PowerRating*24 + 100*SubComponent_Induction_PowerRating +
 +    (5 * ex_1d004p_year99 * Slider_DesignFocus_Performance) +
 +    8*(Slider_Technology_Components+Slider_Technology_Materials + 
 +    Slider_Technology_Technologies +Slider_Technology_Techniques))*ex_1d0024p_year99))
 +    
 +Torque = Torque * ((SubComponent_Cylinders_CylinderCount * Stroke_mm*0.93 * Bore_mm*0.9)*0.000027)+5    
 +
 +if year < 2050 then:
 +    Torque = Torque * ex_0d996p_year50R
 +
 +Torque = Torque * SubComponent_Valve_PowerRating
 +
 +</code>
 +
 +
 +==== RPM ====
 +
 +<code cpp>
 +
 +tmpAY = AdjustedYear
 +
 +if tmpAY > 80 then:
 +    tmpAY = 80 + ((AdjustedYear-80)/5)
 +
 +
 +rpm = ((((tmpAY^4)*0.00000420875) - 
 +    ((19*(tmpAY^3))*0.00016835) + ((427*(tmpAY^2))*0.00126) +
 +    ((1315*(tmpAY))*0.01515) + 620 ) + (265 * ex_1d01p_year99 * Slider_DesignFocus_Performance) +
 +    (465 * ex_1d0105p_year99 * (Slider_Performance_Revolutions*5.5)) -
 +    (10 * ex_1d01p_year99 * SubComponent_Induction_PowerRating) +
 +    (55 * ex_1d005p_year99 * (1-Slider_Layout_Weight)) - (30* ex_1d005p_year99 *
 +    (Slider_DesignFocus_FuelEconomy + Slider_Performance_FuelEconomy))+  
 +    (25 * ex_1d01p_year99 * Slider_Technology_Components) + 
 +    (25 * ex_1d01p_year99 * Slider_Technology_Materials) + 
 +    (25 * ex_1d01p_year99 * Slider_Technology_Technologies)) * 
 +    SubComponent_FuelType_RPM
 +
 +
 +rpm = rpm * SubComponent_Valve_RPM
 +
 +rpm = rpm - ((rpm/1.5) * (Stroke_mm/221.136364))
 +
 +if rpm < 25 then:
 +    rpm = 25
 +
 +
 +</code>
 +
 +
 +
 +==== 馬力 ====
 +
 +数値は馬力です。
 +
 +<code cpp>
 +hp = (Torque * rpm) / 5252
 +</code>
 +
 +
 +==== 長さ ====
 +
 +数値はインチ単位です。
 +
 +
 +=== SubComponent_Layout_CylinderLengthArrangment Equals 1 ===
 +
 +<code cpp>
 +Length = (3 + (Displacement_CC/((47.3)+277))) * SubComponent_Layout_Length +
 +    ((SubComponent_Cylinders_CylinderCount)*(Bore_mm/130.0)) +
 +    (SubComponent_Cylinders_CylinderCount+(5*(Bore_mm/130.0))+
 +    2*SubComponent_Valve_Size)
 +   
 +Length = Length + (0.16 * Length * Slider_Layout_Length)
 +</code>
 +
 +
 +=== SubComponent_Layout_CylinderLengthArrangment Equals -1 Or Less ===
 +
 +<code cpp>
 +Bank = SubComponent_Layout_CylinderLengthArrangment * -1
 +
 +Length = 3+(0.039 * (Bore_mm * 2)) + 5 * Slider_Layout_Length
 +
 +Length = Length * Bank
 +</code>
 +
 +
 +
 +=== SubComponent_Layout_CylinderLengthArrangment Equals Any Other Value ===
 +
 +<code cpp>
 +Banks = 0.5;
 +
 +if SubComponent_Layout_CylinderLengthArrangment > 0
 +    Banks = 1.0/SubComponent_Layout_CylinderLengthArrangment
 +
 +Length = (4 + ((Displacement_CC*(Banks*2))/((47.3)+277))) * 
 +    SubComponent_Layout_Length + ((SubComponent_Cylinders_CylinderCount*Banks)*
 +    (Bore_mm/130.0)) + ((SubComponent_Cylinders_CylinderCount*(Banks*2))+
 +    (5*(Bore_mm/130.0))+2*SubComponent_Valve_Size)
 +
 +
 +Length = Length + (0.16 * Length * Slider_Layout_Length);
 +</code>
 +
 +
 +==== 幅 ====
 +
 +数値はインチ単位です。
 +
 +
 +<code cpp>
 +
 +Width = (6 + (Displacement_CC/((57.3)+302))) * SubComponent_Layout_Width + 
 +    ((6*(Bore_mm/115.0))+5*SubComponent_Valve_Size)
 +
 +Width = Width + (0.16 * Width * Slider_Layout_Width)
 +
 +if(SubComponent_Layout_CylinderLengthArrangment < -1)
 +{
 +    Bank = 1/(SubComponent_Layout_CylinderLengthArrangment * -1)
 +    Width = Width * Bank
 +}
 +
 +</code>
 +
 +==== 重さ ====
 +
 +数値はlb単位です。
 +
 +<code cpp>
 +Weight = 30 + (55*((SubComponent_Valve_Weight+ SubComponent_Layout_Weight + 
 +    SubComponent_FuelType_Weight + SubComponent_Induction_Weight + 
 +    SubComponent_Cylinders_Weight)/5.0) )  + (100*(Stroke_mm/80.0)) + 
 +    (((Length*1.95*Width)/80.0) + 
 +    ( 40 + (42 * (((Slider_Layout_Width+Slider_Layout_Length)/2.0)+0.05)) + 
 +    ((15+(15*(SubComponent_Valve_Weight+ SubComponent_Layout_Weight + 
 +    SubComponent_FuelType_Weight + SubComponent_Induction_Weight + 
 +    SubComponent_Cylinders_Weight)/5.0 ) ) * (Slider_Layout_Weight + 0.1)) - 
 +    (15 * Slider_Technology_Materials) + (5 * SubComponent_Induction_Weight)+
 +    (8*(Slider_Layout_Width+Slider_Layout_Length)) ) * 
 +    ((Length*1.78*Width)/800.0)) + 
 +    ((5+(5*SubComponent_Cylinders_Weight))*(SubComponent_Cylinders_CylinderCount))
 +
 +if(SubComponent_Layout_CylinderLengthArrangment > 2)
 +    Weight = Weight * (SubComponent_Layout_CylinderLengthArrangment/2.9)
 +
 +</code>
 +
 +
 +==== 燃費 ====
 +
 +数値はlb単位です。
 +
 +
 +<code cpp>
 +FuelConsumption_MPG = 95 + ((55 * ex_1d0023p_year99) * (Slider_Performance_FuelEconomy+0.1)) +
 +    (40 * ex_1d0023p_year99 * Slider_DesignFocus_FuelEconomy )
 +
 +
 +FuelConsumption_MPG = FuelConsumption_MPG +
 +    (12 * ex_1d0023p_year99*SubComponent_FuelType_FuelRating) + 
 +    (7 * ex_1d0023p_year99*Slider_Technology_Technologies)
 +
 +FuelConsumption_MPG = FuelConsumption_MPG - (15 * ex_1d0051p_year99 * 
 +    (Slider_Performance_Torque + Slider_Performance_Revolutions + Slider_DesignFocus_Performance)) - 
 +    (20 * Slider_Layout_Displacement)+(10*SubComponent_Valve_FuelRating)
 +
 +FuelConsumption_MPG = (FuelConsumption_MPG + (6*SubComponent_Cylinders_FuelRating)+
 +    (6*SubComponent_Layout_FuelRatings))*SubComponent_Induction_FuelRating + 
 +    (Marq_DesignEngineSkill/50.0)
 +
 +if( (1.5+Displacement_CC/350.0) > 0 )
 +    FuelConsumption_MPG = FuelConsumption_MPG/(1.5+Displacement_CC/350.0)
 +
 +FuelConsumption_MPG = FuelConsumption_MPG + 5
 +
 +
 +if( FuelConsumption_MPG < 1 )
 +    FuelConsumption_MPG = 1;
 +
 +if( SubComponent_FuelType_FuelRating < 5 AND FuelConsumption_MPG > 30)
 +{
 +    if( SubComponent_FuelType_FuelRating > 1.5 AND 
 +            FuelConsumption_MPG > (30+(SubComponent_FuelType_FuelRating*2.0)) )
 +    {
 +        FuelConsumption_MPG = FuelConsumption_MPG + 
 +            -FuelConsumption_MPG^0.85+18+(SubComponent_FuelType_FuelRating*2.0)
 +    }
 +    else
 +    {
 +        FuelConsumption_MPG = FuelConsumption_MPG + -FuelConsumption_MPG^0.85+18
 +    }
 +}
 +
 +</code>
 +
 +===== 評価 =====
 +
 +==== 設計要件 ====
 +
 +<code cpp>
 +
 +Design_Requirements = (5 * Slider_DesignFocus_Dependability) + 
 +    (5 * Slider_DesignFocus_FuelEconomy) +
 +    (5 * Slider_DesignFocus_Performance) + (3 * Slider_Performance_Revolutions)  + 
 +    (2 * Slider_Performance_FuelEconomy) + (2 * Slider_Performance_Torque) + 
 +    (2 * Slider_Technology_Technologies) + (1-Slider_Layout_Weight) + 
 +    (Slider_Layout_Displacement + (1-Slider_Layout_Length + 
 +    (1-Slider_Layout_Width))) - (2 * Slider_Technology_Techniques)
 +
 +Design_Requirements = Design_Requirements + (SubComponent_Cylinders_DesignRequire) +
 +    (SubComponent_FuelType_DesignRequirements) + (SubComponent_Valve_DesignRequirements) +
 +    (5 * SubComponent_Induction_DesignRequirements) +
 +    (3* SubComponent_Layout_DesignRequirements)
 +
 +Design_Requirements = 2.7027 * Design_Requirements
 +
 +
 +</code>
 +
 +==== 製造要件 ====
 +
 +<code cpp>
 +
 +Manufacturing_Requirements = (Slider_Layout_Displacement ) + (2*(1-Slider_Layout_Length)) +
 +    (2*(1-Slider_Layout_Width)) + (Slider_Performance_FuelEconomy) + 
 +    (Slider_Performance_Revolutions * 2) + (2 * Slider_Performance_Torque) + 
 +    (Slider_Technology_Components + Slider_Technology_Materials +
 +    Slider_Technology_Technologies + (3 * Slider_Technology_Techniques))
 +
 +Manufacturing_Requirements = Manufacturing_Requirements + 
 +    (3 * SubComponent_Cylinders_ManufacturingRequire) +
 +    ( 3 * SubComponent_Layout_ManufacturingRequirements) + 
 +    ( 2 * SubComponent_Induction_ManufacturingRequirements) +
 +    (SubComponent_FuelType_ManufacturingRequirements) +
 +    ( 2 * SubComponent_Valve_ManufacturingRequirements)
 +
 +
 +Manufacturing_Requirements = Manufacturing_Requirements * 3.7037
 +
 +</code>
 +
 +
 +
 +==== パワー評価 ====
 +
 +<code cpp>
 +if( SubComponent_Cylinders_CylinderCount > 0 )
 +    Power_Rating = Torque / ( (100 * ex_1d007p_year99) * SubComponent_Cylinders_CylinderCount / 2.2 )
 +
 +Power_Rating = Power_Rating * 50
 +
 +if( Power_Rating > 50 )
 +    Power_Rating = 50
 +
 +Power_Rating = Power_Rating + ( 50 * ( Torque/2000.0 ) )
 +
 +if( Power_Rating > 100 )
 +    Power_Rating = 100
 +
 +
 +</code>
 +
 +
 +==== 燃費評価 ====
 +
 +<code cpp>
 +FuelEconomy_Rating = (FuelConsumption_MPG / 120.0)* 100;
 +
 +if(FuelEconomy_Rating >100)
 + FuelEconomy_Rating = 100;
 +
 +</code>
 +
 +
 +
 +==== 信頼性 ====
 +
 +<code cpp>
 +Reliability_Rating = (6 * Slider_DesignFocus_Dependability) + 
 +    (3* (1-Slider_DesignFocus_Performance)) + (5*(1-(rpm/10000.0)))  +
 +    (2*1-Slider_Performance_Torque) + (3*1-Slider_Performance_Revolutions) + 
 +    (3 * Slider_Technology_Components) + (2 * Slider_Technology_Materials) + 
 +    (1-Slider_Technology_Technologies) + (Slider_Technology_Techniques)
 +
 +
 +Reliability_Rating = Reliability_Rating + (1 * SubComponent_Cylinders_ReliabilityRating) + 
 +    (1 * SubComponent_FuelType_ReliabilityRating) + 
 +    (1 * (1-SubComponent_Induction_ReliabilityRating)) + 
 +    (1 * SubComponent_Layout_Reliability) + 
 +    (2*SubComponent_Valve_ReliabilityRating)
 +
 +Reliability_Rating = Reliability_Rating + (8 * (1-(Stroke_mm/150.0)))
 +
 +Reliability_Rating = Reliability_Rating / 4.5
 +
 +Reliability_Rating = Reliability_Rating * 10
 +
 +Reliability_Rating = Reliability_Rating + (Marq_DesignEngineSkill/10.0)
 +
 +
 +if(Reliability_Rating<0)
 + Reliability_Rating = 0
 +
 +if(Reliability_Rating>100)
 + Reliability_Rating = 100
 +
 +</code>
 +
 +
 +==== 滑らかさ ====
 +
 +<code cpp>
 +Smoothness_Rating = (-(1.0/10.0)*((SubComponent_Cylinders_CylinderCount-8) * 
 +    (SubComponent_Cylinders_CylinderCount-8))+5)
 +
 +Smoothness_Rating = Smoothness_Rating + (SubComponent_Cylinders_SmoothnessRating * 2) + 
 +    (SubComponent_FuelType_SmoothnessRating * 2) + (SubComponent_Layout_Smoothness*2) +
 +    (Slider_Technology_Components * 3) + (Slider_Technology_Technologies * 2) + 
 +    (Slider_Technology_Techniques * 3) + (SubComponent_Valve_SmoothnessRating*2) + 
 +    (Marq_DesignEngineSkill/25)
 +
 +Smoothness_Rating = Smoothness_Rating * 4
 +
 +if( Smoothness_Rating > 100 )
 +    Smoothness_Rating = 100
 +
 +if(Smoothness_Rating < 1 )
 +    Smoothness_Rating = 1;
 +
 +
 +</code>
 +
 +
 +
 +==== 総合 ====
 +
 +<code cpp>
 +Overall_Rating = (Reliability_Rating + FuelEconomy_Rating + Power_Rating + 
 +    Smoothness_Rating + (Marq_DesignEngineSkill))/5
 +
 +Overall_Rating = Overall_Rating + (5*PreResearchEngineAmountEffect)
 +
 +if(Overall_Rating > 100)
 +    Overall_Rating = 100
 +</code>
 +===== その他 =====
 +
 +
 +==== 単価 ====
 +
 +<code cpp>
 +Unit_Costs =((((((70* ex_1d01p_year99 * (((1-Slider_Layout_Length) + (1-Slider_Layout_Width))/2.0)) +
 +    (220 * ex_1d004p_year99 * (((0.25+(Slider_Performance_Revolutions * 
 +    Slider_Performance_Revolutions) + (Slider_Performance_Torque * Slider_Performance_Torque))/2.0) -
 +    (0.5-(Slider_Performance_FuelEconomy*Slider_Performance_FuelEconomy)) )  ) +
 +    (60 * ex_1d01p_year99) *  ((Slider_Performance_Revolutions * Slider_Performance_Revolutions) +
 +    (Slider_Performance_Torque * Slider_Performance_Torque)) +
 +    220 * ex_1d008p_year99*(0.1+(((Slider_Technology_Materials*Slider_Technology_Materials)+
 +    (Slider_Technology_Techniques*Slider_Technology_Techniques ) + 
 +    (Slider_Technology_Components*Slider_Technology_Components))) ) +
 +    170 * ex_1d008p_year99*(Slider_Technology_Technologies*Slider_Technology_Technologies) +
 +    50 * ex_1d0035p_year99 * (Slider_DesignFocus_Dependability * Slider_DesignFocus_Dependability) +
 +    180 * ex_1d0035p_year99 * (Slider_DesignFocus_Performance * Slider_DesignFocus_Performance )+
 +    (260 * ex_1d006p_year99 * (2.168 * Slider_Layout_Displacement^1.5 -4.44 * Slider_Layout_Displacement^3 +
 +    2.646  * Slider_Layout_Displacement^4.5 + 3.126 * Slider_Layout_Displacement^6 )+
 +    (70 * ex_1d005p_year99 * (SubComponent_Cylinders_CylinderCount/6.0) + 
 +    (.75 +  Slider_Layout_Displacement^1.5) - (Slider_Layout_Weight^2)) + 10 * 
 +    (Slider_DesignFocus_FuelEconomy^2) - 50 ) *  ex_1d003p_year99 + 
 +    (160 * SubComponent_Cylinders_UnitCosts)^ex_1d003p_year99 +
 +    (120 * SubComponent_Layout_UnitCosts)^ex_1d004p_year99 +
 +    (140 * SubComponent_Valve_UnitCosts)^ex_1d004p_year99 +
 +    (435 * SubComponent_Induction_UnitCosts)^ex_1d004p_year99 +
 +    (120 * SubComponent_FuelType_UnitCosts)^ex_1d004p_year99) * 
 +    (.125 + 0.12 * SubComponent_Cylinders_CylinderCount)) * 
 +    (Global_Interest_Rate/2.0)) + 50)  * carPriceRate) * (designRandomVal);
 +    
 +Hyper_Sliders = ((Slider_Layout_Displacement*2 + (1-Slider_Layout_Length) + 
 +    (1-Slider_Layout_Width) + (1-Slider_Layout_Weight)) +
 +    (Slider_Performance_Revolutions + Slider_Performance_Torque + Slider_Performance_FuelEconomy) +
 +    (Slider_DesignFocus_Performance + Slider_DesignFocus_FuelEconomy  + Slider_DesignFocus_Dependability) +
 +    (Slider_Technology_Materials + Slider_Technology_Components + Slider_Technology_Techniques +
 +    Slider_Technology_Technologies))/13.0;
 +
 +Hyper_Costs = 475 * ex_1d04p_year99 * (Hyper_Sliders*Hyper_Sliders*Hyper_Sliders*Hyper_Sliders);
 +
 +
 +Unit_Costs = Unit_Costs + Hyper_Costs - ((Unit_Costs/10) * (Marq_DesignEngineSkill/100));
 +    
 +</code>
 +
 +
 +==== 設計コスト ====
 +
 +<code cpp>
 +Design_Costs = (((18000 * ( 0.05+Slider_Layout_Displacement^1.5 ) *ex_1d025p_year99 +
 +    (4000 * (1-(Slider_Layout_Weight*Slider_Layout_Weight))  *ex_1d033p_year99)  +
 +    5000 *  (0.15+(Slider_Technology_Materials * Slider_Technology_Materials ) + 
 +    (Slider_Technology_Techniques * Slider_Technology_Techniques ) + 
 +    (Slider_Technology_Components * Slider_Technology_Components))^ 
 +    (0.1 + (Slider_DesignFocus_Performance * Slider_DesignFocus_Performance) + 
 +    (Slider_DesignFocus_Dependability * Slider_DesignFocus_Dependability) + 
 +    (Slider_DesignFocus_FuelEconomy * Slider_DesignFocus_FuelEconomy)) *
 +    ex_1d033p_year99+2500*((1.01 - Slider_Layout_Weight)*(1.01-Slider_Layout_Weight)) * ex_1d033p_year99 -
 +    2500 * ex_1d033p_year99 * ((1-Slider_Layout_Width)+ (1-Slider_Layout_Length)) +
 +    12000 * (0.2+(Slider_DesignFocus_Performance*Slider_DesignFocus_Performance) +
 +    (Slider_DesignFocus_FuelEconomy*Slider_DesignFocus_FuelEconomy)) * 
 +    ex_1d05p_year99 +1500*(3.5+ (Slider_DesignFocus_Dependability*Slider_DesignFocus_Dependability)) *
 +    ex_1d039p_year99)*ex_1d03p_year99 +
 +    (4000 * ((Slider_Performance_FuelEconomy *Slider_Performance_FuelEconomy ) + 
 +    (Slider_Performance_Revolutions * Slider_Performance_Revolutions ) + 
 +    (Slider_Performance_Torque*Slider_Performance_Torque)) * ex_1d038p_year99) +
 +    (3000 * (Slider_Technology_Technologies * Slider_Technology_Technologies) * ex_1d035p_year99) +
 +    (Hyper_Costs * (500*ex_1d035p_year99)) +
 +    ((95 * SubComponent_Cylinders_DesignCosts)^ex_1d01p_year99) +
 +    ((115 * SubComponent_Layout_DesignCosts)^ex_1d01p_year99) +
 +    ((195* SubComponent_Induction_DesignCosts)^ex_1d01p_year99) +
 +    ((90* SubComponent_Valve_UnitCosts)^ex_1d01p_year99) +
 +    ((90 * SubComponent_FuelType_DesignCosts)^ex_1d01p_year99) * 
 +    (Global_Interest_Rate)) * ex_1d003p_year99)
 +
 +
 +if(year > 1910 && year < 1930)
 +    Design_Costs = Design_Costs * (SubComponent_Cylinders_CylinderCount*(1 - 0.0375 * (year-1910)))
 +else if(year > 1930 && year < 1950)
 +    Design_Costs = Design_Costs * (SubComponent_Cylinders_CylinderCount*(0.25 - ( 0.005 * (year-1930) )))
 +else if( year > 1950 )
 +    Design_Costs = Design_Costs * (SubComponent_Cylinders_CylinderCount * 0.15);
 +    
 +
 +Design_Costs = (Design_Costs * 0.85) + ((Design_Costs *0.15 ) * SubComponent_Cylinders_DesignCosts)
 +
 +
 +Design_Costs = (Design_Costs/5)+(Design_Costs*(Slider_DesignFocus_DesignPace*Slider_DesignFocus_DesignPace*4.5))
 +</code>
 +
 +
 +==== 開発期間 ====
 +
 +<code cpp>
 +
 +Finish_Time =   (((0.55 * Slider_Layout_Displacement) + (1- Slider_Layout_Weight) +
 +    0.45 * (Slider_Performance_Revolutions + Slider_Performance_Torque + Slider_Performance_FuelEconomy) +
 +    0.45 * (Slider_DesignFocus_Dependability + Slider_DesignFocus_FuelEconomy + 
 +    Slider_DesignFocus_Performance))*ex_1d004p_year99 +  (SubComponent_Cylinders_FinishTime) +
 +    (SubComponent_Layout_FinishTime) + (.75 * SubComponent_Induction_FinishTime) + 
 +    (.55 * SubComponent_FuelType_FinishTime)) + SubComponent_Valve_FinishTime + 1-
 +    (2*(FactOverallVAL/100.0))+ (1.15*ex_1d003p_year99*Hyper_Sliders)
 +
 +Finish_Time = Finish_Time + ((year-1850)/50)
 +
 +additionalTime = 0;
 +
 +if(year < 2021)
 +{
 +    if(( Slider_DesignFocus_DesignPace + 0.05 )  > 0)
 +        additionalTime = ( ((year-1840)/15.0 ) *((0.5/( Slider_DesignFocus_DesignPace+0.05) ) - 0.45) )
 +    else
 +        additionalTime = ( ((year-1840)/15.0 ) *((0.5/(0.05) ) -0.45) )
 +
 +}
 +else
 +{
 +    if(( Slider_DesignFocus_DesignPace+0.05)  > 0)
 +        additionalTime = ( ((2020-1840)/15.0 ) *((0.5/( Slider_DesignFocus_DesignPace+0.05) ) - 0.45) )
 +    else
 +        additionalTime = ( ((2020-1840)/15.0 ) *((0.5/(0.05) ) -0.45) )
 +}
 +
 +if(Slider_DesignFocus_DesignPace < 0.5)
 +{
 +    Finish_Time = Finish_Time +  additionalTime
 +}
 +else
 +{
 +    turnsOff = (Slider_DesignFocus_DesignPace - 0.5)/0.20
 +    Finish_Time = Finish_Time +  (additionalTime - turnsOff)
 +}
 +
 +if(Finish_Time < 1)
 +    Finish_Time = 1
 +
 +
 +</code>
 +
 +
 +==== 所要従業員 ====
 +
 +<code cpp>
 +if(year < 2021)
 +    Engineers_Required = Design_Requirements * (0.11833*(year-1899)+0.275);
 +else
 +    Engineers_Required = Design_Requirements * (0.11833*(121)+0.275);
 +
 +
 +Engineers_Required = Engineers_Required/5 + ((Engineers_Required/1.2)*
 +    Slider_DesignFocus_DesignPace) + 3;
 +
 +</code>