マニュアルのゲームメカニクスセクションでは、ゲームの計算で使用される内部式の詳細を説明します。このセクションでは擬似的なコードを使用しており、ゲーム内のコードと100%同じではない可能性があります。

マニュアルのゲームメカニクスパートは、主に 「なぜX、Y、Zをするとこの評価になるのか？」というよくある質問に対する参考資料として作成されています。通常、この答えには多くの異なる変数が含まれますが、マニュアルのこのセクションではそれを実証しています。

マニュアルのゲームメカニクスセクションは、ソーセージがどのように作られるかを示しています。ですから、ゲームを楽しむなら、このマニュアルの部分は避けた方がいいかもしれません。

計算式で使用する変数とその説明の表です。

シャーシ長　cm。

Chassis_Length = (145 + Global_Lengths * (2.3*Slider_FD_Length)) - ((Global_Lengths * 0.5)/5)

シャーシ幅　cm。

Chassis_Width = (100 + Global_Width * Slider_FD_Width + 20 * Slider_FD_Length)

シャーシ重量　kg。

Chassis_Weight = 40 + ((Global_Weight) * (1.25*Slider_FD_Weight+0.1) +
	((Global_Weight*.5)*(6*Slider_FD_Length+0.1)) +
	((Global_Weight/15)*(3.3*Slider_FD_Width+0.1)) + 
	((Global_Weight/20)*(2*Slider_FD_Height+0.1)) +
	((Global_Weight/5)*(5*SubComponent_Frame_Weight+0.1)) + 
	((Global_Weight/10)*(3*SubComponent_Drive_Weight+0.1)) - 
	((Global_Weight/5)*(Slider_TECH_Materials)) -
	((Global_Weight/8)*(Slider_DE_Performance)) - 
	((Global_Weight/11)*(Slider_TECH_Techniques)))
 
if year is less than 1981)
	Chassis_Weight /= (2.0 * ex_0d9962p_year99)
else
	Chassis_Weight /= (1.469262941607760500229789005264 )

最大エンジン長　インチ。

Max_Engine_Length = (8 + ((((Global_Lengths*2.25) / 24) * 
	((Slider_FD_Length+.1)*2.5)) + ((Global_Lengths*2.25) / 24)  * 
	(Slider_FD_ENG_Length+.1)))*SubComponent_Drivetain_Engine_Length

最大エンジン幅　インチ。

Max_Engine_Width = (8 + ((12  * ((Slider_FD_Width+0.1))*2.5) + 13 *
           (1.25*Slider_FD_ENG_Width + 0.1)))*SubComponent_Drivetain_Engine_Width

0-100に制限される値。

Comfort_Rating = ((Slider_DE_Control ) + (SubComponent_Drive_rideSteering) +
	(Slider_FD_Weight ) + (SubComponent_FrSus_Braking + 
	SubComponent_RrSus_Braking + Slider_SUS_Braking * 4.5) + 
        (SubComponent_FrSus_Comfort + SubComponent_RrSus_Comfort + 
        Slider_SUS_Comfort * 6 ) + (SubComponent_FrSus_Steering + 
        SubComponent_RrSus_Steering + Slider_SUS_Stability * 4.5) + 
        ((Slider_TECH_Compoenents + Slider_TECH_Materials + 
        Slider_TECH_Tech + Slider_TECH_Techniques)/2))
 
 
Comfort_Rating /=  2.6
 
Comfort_Rating *= 10
 
Comfort_Rating += (10 * (Marq_DesignChassisSkill/100.0))
 
if Comfort_Rating is greater than 100
    Comfort_Rating = 100
 

0-100 に制限される値。

Performance_Rating = Slider_SUS_Braking*2 +(Slider_DE_Performance) - 
	(Slider_FD_Weight*2)+ (Slider_SUS_Performance*4)+
	(SubComponent_FrSus_Steering)+(SubComponent_RrSus_Steering)+
	((Slider_TECH_Compoenents+Slider_TECH_Materials*2+
	Slider_TECH_Tech+Slider_TECH_Techniques)/2.0)+
        SubComponent_FrSus_Performance + SubComponent_RrSus_Performance + 
        SubComponent_Frame_Performance + SubComponent_Drive_carPerformance*2 - 
        (Slider_FD_Length+Slider_FD_Width)+(1.0-Slider_SUS_Stability)
 
Performance_Rating /= 2.0
 
Performance_Rating *= 10
 
Performance_Rating += (10 * (Marq_DesignChassisSkill/100.0))
 
if Performance_Rating is greater than 100
    Performance_Rating = 100

0-100 に制限される値。

Strength_Rating = (((SubComponent_Drive_Weight + SubComponent_Frame_Weight)/4) + 
        Slider_FD_Weight*2 + ((SubComponent_Drive_Duriblity  +  SubComponent_Frame_Durability + 
        SubComponent_RrSus_Durability + SubComponent_FrSus_Durability )/6) + 
        Slider_FD_Height * 5 + SubComponent_Frame_Str*8 + Slider_DE_Str + 
        ((Slider_TECH_Compoenents*2 + Slider_TECH_Materials*2 + 
        Slider_TECH_Tech*2 + Slider_TECH_Techniques*2)/2)+(Slider_FD_Length))
 
Strength_Rating /=  2.6
 
Strength_Rating *= 10
 
Strength_Rating += (10 * (Marq_DesignChassisSkill/100.0))
 
if Strength_Rating is greater than 100
    Strength_Rating = 100

0-100 に制限される値。

Durability_Rating = Slider_DE_Depend*0.5 + SubComponent_Drive_Duriblity*1.5 + 
        SubComponent_Frame_Durability*1.5 + ((SubComponent_FrSus_Durability + 
        SubComponent_RrSus_Durability)/2) + Slider_SUS_Durability*2.5 + 
        ((Slider_TECH_Compoenents + Slider_TECH_Materials + 
        Slider_TECH_Techniques - Slider_TECH_Tech))
 
Durability_Rating *= 10
 
Durability_Rating += (10 * (Marq_DesignChassisSkill/100.0))
 
if Durability_Rating is greater than 100
    Durability_Rating = 100

0-100 に制限される値。

Overall_Rating = (Comfort_Rating + Performance_Rating +
	Strength_Rating + Durability_Rating + Marq_DesignChassisSkill)/5
 
Overall_Rating +=  (5*PreResearchChassisAmountEffect)
 
if Overall_Rating is greater than 100
    Overall_Rating = 100

0-100 に制限される値。

Design_Req = (Slider_DE_Control + Slider_DE_Depend + Slider_DE_Performance 
            + Slider_DE_Str + SubComponent_Drive_Design + SubComponent_Frame_Design 
            + SubComponent_FrSus_Design + SubComponent_RrSus_Design)  
 
Design_Req += ((Slider_FD_ENG_Length + Slider_FD_ENG_Width + (1- Slider_FD_Weight)
                        + Slider_SUS_Braking + Slider_SUS_Comfort + Slider_SUS_Durability
                        + Slider_SUS_Performance + Slider_TECH_Tech)/4)
 
Design_Req = (Design_Req - Slider_TECH_Techniques) * 10

Manufacturing_Req = ((SubComponent_Frame_Weight/2) + Slider_SUS_Durability + Slider_DE_Depend
        + Slider_TECH_Compoenents + Slider_TECH_Materials + Slider_TECH_Tech
        + (Slider_TECH_Techniques * 1.5) + SubComponent_Frame_Manu + SubComponent_Drive_Manu
        + SubComponent_FrSus_Manu + SubComponent_RrSus_Manu);
 
Manufacturing_Req = Manufacturing_Req * 10 + 0.01;

if year before 2021
    Engineers_Required = Design_Req * (0.08833*(year-1899)+0.275);
else	
    Engineers_Required = Design_Req * (0.08833*(121)+0.275);
 
 
Engineers_Required = Engineers_Required/5 + ((Engineers_Required/1.2)*Slider_DesignPace) + 2;

Costs_Dimension_Sliders = (Slider_FD_Height * Slider_FD_Height)  + 
        (Slider_FD_Length * Slider_FD_Length*1.2)  +
        (Slider_FD_Width*Slider_FD_Width) +  ((1-Slider_FD_Weight) * 
        (1-Slider_FD_Weight)) +
        (Slider_FD_ENG_Length * Slider_FD_ENG_Length*0.8) + 
        (Slider_FD_ENG_Width *Slider_FD_ENG_Width *0.8)
 
Costs_Frame = ((Costs_Dimension_Sliders * (25* ex_1d015p_year99) * 
        SubComponent_Drive_Cost) 
        * SubComponent_Frame_Cost) * ex_1d015p_year99 * (carPriceRate)
 
 
Costs_Frame = 15  * ex_1d02p_year99+ Costs_Frame + 1 + (.04 * Costs_Frame) + 
        (15 * ex_1d015p_year99 * SubComponent_Drive_Cost) + 
        (15 * ex_1d015p_year99 * SubComponent_Frame_Cost)
 
 
 
Costs_Suspensions_Sliders = (Slider_SUS_Braking * Slider_SUS_Braking * 0.75) + 
        (Slider_SUS_Comfort * Slider_SUS_Comfort *1.25 ) +
        (Slider_SUS_Performance * Slider_SUS_Performance *1.2 )+ 
        (Slider_SUS_Durability * Slider_SUS_Durability *1.35 ) + 
        (Slider_SUS_Stability *  Slider_SUS_Stability )
 
Costs_Suspension = (( Costs_Suspensions_Sliders  * (20 * ex_1d02p_year99) * 
        SubComponent_FrSus_Cost) * SubComponent_RrSus_Cost) *
        ex_1d015p_year99 * (carPriceRate)
 
Costs_Suspension = 15 * ex_1d02p_year99+ Costs_Suspension + 
        1 + (.04 * Costs_Suspension) + 
        (15 * ex_1d015p_year99 * SubComponent_FrSus_Cost) +
        (15 * ex_1d015p_year99 * SubComponent_RrSus_Cost)
 
 
Costs_Tech_Sliders = (Slider_TECH_Compoenents * Slider_TECH_Compoenents * 1.15) + 
        (Slider_TECH_Materials * Slider_TECH_Materials * 1.25) +
        (Slider_TECH_Tech * Slider_TECH_Tech * 1.25) + 
        (Slider_TECH_Techniques * Slider_TECH_Techniques * 0.75)
 
 
Costs_Tech = Costs_Tech_Sliders * (30 * ex_1d015p_year99)  * (carPriceRate)
 
Costs_Tech = 15 * ex_1d015p_year99+ Costs_Tech + 1 + (.04 * Costs_Tech)
 
 
Costs_Hyper_Sliders = ((Slider_DE_Control + Slider_DE_Depend + 
    Slider_DE_Performance + Slider_DE_Str) +
    (Slider_FD_Length+ Slider_FD_Width+ Slider_FD_Height + 
    (1-Slider_FD_Weight)+ Slider_FD_ENG_Width + Slider_FD_ENG_Length) +
    (Slider_SUS_Stability + Slider_SUS_Comfort + Slider_SUS_Performance +
    Slider_SUS_Braking+Slider_SUS_Durability) +
    (Slider_TECH_Materials+ Slider_TECH_Compoenents +
    Slider_TECH_Techniques + Slider_TECH_Tech))/19.0
 
 
Costs_Hyper = 450 * ex_1d045p_year99 * (Costs_Hyper_Sliders^4)
 
Manufacturing_Costs = ((Costs_Frame + Costs_Suspension + Costs_Tech) *
                    (carPriceRate)) * designRandomVal
 
Manufacturing_Costs += Manufacturing_Costs-((Manufacturing_Costs/10.0)
                    * (Marq_DesignChassisSkill/100.0))

 
DesignCosts_FrameSliders = (Slider_FD_ENG_Length * Slider_FD_ENG_Length ) +
                        (Slider_FD_ENG_Width * Slider_FD_ENG_Width) + 
                        (Slider_FD_Height *Slider_FD_Height ) + 
                        (Slider_FD_Length * Slider_FD_Length * 1.2) + 
                        (Slider_FD_Width * Slider_FD_Width * 0.8) + 
                        (1-(Slider_FD_Weight * Slider_FD_Weight * 0.8))
 
 
DesignCosts_Frame = DesignCosts_FrameSliders * (7000 * ex_1d028p_year99)
 
DesignCosts_Frame = (DesignCosts_Frame + 5000 ) * 
                    SubComponent_Frame_Design * SubComponent_Drive_Design;
 
DesignCosts_SuspensionSliders = (Slider_SUS_Braking * Slider_SUS_Braking * 0.8 ) + 
                    (Slider_SUS_Comfort * Slider_SUS_Comfort * 1.2) + 
                    (Slider_SUS_Durability *  Slider_SUS_Durability * 1.25) + 
                    (Slider_SUS_Performance * Slider_SUS_Performance * 1.15 ) + 
                    (Slider_SUS_Stability * Slider_SUS_Stability * 1.05)
 
DesignCost_Suspension = DesignCosts_SuspensionSliders *  (9000 * ex_1d028p_year99)
 
DesignCost_Suspension = (DesignCost_Suspension + 2500) * 
                        SubComponent_FrSus_Design * SubComponent_RrSus_Design
 
DesignCosts_DesignSliders = (Slider_DE_Control*Slider_DE_Control*10) + 
                            (Slider_DE_Depend*Slider_DE_Depend*10) + 
                            (Slider_DE_Performance*Slider_DE_Performance*10) + 
                            (Slider_DE_Str*Slider_DE_Str*10)
 
DesignCosts_Design = DesignCosts_DesignSliders * (14000 * ex_1d028p_year99)
 
DesignCosts_Design = (DesignCosts_Design + 12000 ) * SubComponent_Frame_Design *
                    SubComponent_Drive_Design * SubComponent_FrSus_Design *
                    SubComponent_RrSus_Design
 
DesignCosts_TechSliders = (Slider_TECH_Compoenents * Slider_TECH_Compoenents) +
                        (Slider_TECH_Materials  * Slider_TECH_Materials ) + 
                        (Slider_TECH_Tech * Slider_TECH_Tech ) + 
                        (Slider_TECH_Techniques * Slider_TECH_Techniques)
 
DesignCosts_Tech = DesignCosts_TechSliders *  (9500 * ex_1d028p_year99)
 
DesignCosts_Tech = (DesignCosts_Tech + 15000)
 
//See Manufacturing Costs For Calculations.
Costs_Hyper_Sliders = Costs_Hyper_Sliders * (100*ex_1d025p_year99);
 
DesignCosts = (DesignCosts_Frame + DesignCost_Suspension + DesignCosts_Design +
            DesignCosts_Tech + Costs_Hyper_Sliders) *ex_1d032p_year99
 
DesignCosts = (DesignCosts/5)+(DesignCosts*(Slider_DesignPace*Slider_DesignPace*4.5))

FinishTime_Frame = ((Slider_FD_Height + Slider_FD_Length + Slider_FD_Width +
            ((Slider_FD_ENG_Length + Slider_FD_ENG_Width)/1.5))/
            (Slider_FD_Weight + .25))
 
FinishTime_Suspension = ((Slider_SUS_Braking*0.5 + Slider_SUS_Comfort + 
                        Slider_SUS_Durability + Slider_SUS_Performance + 
                        Slider_SUS_Stability)/2)
 
FinishTime_Design = (Slider_DE_Control + Slider_DE_Depend + 
                    Slider_DE_Performance + Slider_DE_Str) * 6
 
FinishTime_Tech = ((Slider_TECH_Compoenents + Slider_TECH_Materials + 
                    Slider_TECH_Tech) / 1.25);
 
FinishTime  = 4 + ((FinishTime_Frame + FinishTime_Suspension + 
            FinishTime_Design + FinishTime_Tech)/4.95) * 
            ex_1d005p_year99 + (1.15*ex_1d003p_year99*hyperSliders)
 
 
if year is less than 2020
{
    if Slider_DesignPace+0.05 is greater than 0
        AdditionalTime = (((year-1840)/15.0)*((0.5/(Slider_DesignPace+0.05))-0.45))
    else
        AdditionalTime = (((year-1840)/15.0)*((0.5/(0.05))-0.45))
}
else
{
    if Slider_DesignPace+0.05 is greater than 0
        AdditionalTime = (((2020-1840)/15.0)*((0.5/(Slider_DesignPace+0.05))-0.45))
    else
        AdditionalTime = ( ((2020-1840)/15.0 ) *((0.5/(0.05) ) -0.45) )
}
 
if Slider_DesignPace is less than 0.5
{
    FinishTime = FinishTime + AdditionalTime;
}
else
{
    TurnsOff = (Slider_DesignPace - 0.5)/0.20;
    FinishTime = FinishTime +  (AdditionalTime - TurnsOff);
}
 
if FinishTime is less than 1
    FinishTime = 1;